Split Case V-Drive Gasket Kit

Split Case V-Drive Gasket Kit

This gasket kit includes all gaskets necessary to rebuild a Casale split case V-drive including:

• * Case Gaskets, on .015” and two .030” (1/2” plate uses just the two .030” gaskets, and the 3/8” plate versions use all three gaskets).

• *Ten .005”bearing cap gaskets for the input flange and the two front bearing caps. (these gaskets are used for sealing and shimming the cap for proper clearance).

• * Three .005 output flange housing gaskets for direct drive V-drives (usually two are required to establish proper clearance).

• * Five .005” output housing gaskets used for the in-n-out version of the V-drive.

•  *One in-n out side cover gasket.

• * Two o-rings used on the end of the upper and lower shafts under the inner bearing races.

• * One o-ring for the shift shaft seal.