O-Ring kit for Billet Oil Filter Bypass/Block-off Mark iV

$7.12
SKU
TCM ORING-KIT-IV

O-Ring Kit

Used when installing BBC Oil Adapter kits BIL0613

Prop65 Warning Icon

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Installation Instructions:

1. The outlet is the port closest to the edge of the adaptor. The asapter must be installed with the outlet closest to the oil pan for maximun oil flow. Properly installed, the TEAGUE logo will be towards the outside of the engine.

2. The oil ports are 3/4" npt. Use Loctite #567 pst pipe sealant on adapter pipe threads.

3. Use Loctite #271 on the bolt threads in block. Use Loctite #567 pst pipe sealant on o-rings under bolt heads.

4. The TCM BIL061B Remote oil adapter will work on all world products,GM blocks and MARK IV GM Bowtie Blocks. NOTE: Some short deck BOWTIE Blocks require a .030 inch shorter step between sealing surfaces. If your block is a GM short deck BOWTIE, measure to verify depth.

5. On World Products PRO Merlin Blocks. the inner o-ring is used for sealing. It is OK to see the part of the outer o-ring beyond the casting once the adapter is installed.

6. If a 90 degree adapter is desired in one of the oil ports, the 90 degree fitting must be installed first. than the straight adapter.

More Information
Model TCM ORING-KIT-IV
SKU TCM ORING-KIT-IV
Manufacturer TEAGUE CUSTOM MARINE
Write Your Own Review
You're reviewing:O-Ring kit for Billet Oil Filter Bypass/Block-off Mark iV
Your Rating
To Top